Statički Zaštitna Film

Kratki opis:

Electrostatic film is actually made with a kind of electrostatic fluid, co-extruded on the surface of the original film, to play a role of adhesion. People also call it as self-absorptive film, self-adhered film, non glue film or non-gel film.

Pojedinosti o proizvodu

proizvoda Oznake

1.Product Basic Structure For Static Protective Film:

Static Protective Film

2. Product SpecificationFor Static Protective Film

Opća svojstva
ARTIKAL JEDINICA SPEC Tolaahriance TEST STANDARD
Izgled / Čisto / Visual
Širina mm 1000-1540 ±5% GB/T451.2-2002
dužina metar 100-5000 ±5% GB/T451.2-2002
Debljina um 30-80 ±5% GB/T7125-2014
prianjanje GF / 25mm 1-50 ±5% GB/T 2792-2014

 

3. primjena & Characters For Static Protective Film:
◆ Uniformity of thickness and good flatness;
◆ The product has good transparency, no water ripple and small crystal point.
◆ High static resistance and good static effect.
◆ Good viscosity, which can be adjusted to the customer’s requirements;
◆ This product meets the national industry standards.
◆ Widely applicable to glass, lenses, high gloss plastic surface, ABS board, PC ploča, PMMA sheet, acrylic materials and other very smooth surface.

Static Protective Film

4. Direction Use For Static Protective Film
◆ Clean your material thoroughly before use. Držite površine suhe i čiste, bez ulja, prašina, otapala ili druge kemikalije kako bi se spriječilo bilo ostatak dogoditi.
◆ Use roller or stamping machine when use the protective film.
◆ Make sure the film is perfectly stick to material.
◆ Suggested temperature of surface and surroundings at +15°C to 40°C for the embossed film lamination.

5. Storage Condition
◆ Best keep it in temperature 23±2(℃), humidity 65%±5%.
◆ Guaranteed period: Within 6 months after purchase. Not included if it exposed to sunlight, above 40℃ and 70% humidity or below 0℃.

6. Precautions:
◆ Podaci iznad je testiran metodom prepoznavanja industrije, ali ne kao jamstvo za veličinu proizvoda.
◆ Provjerite s uzorkom prije ili Kontaktirajte nas kad uporaba u posebnom materijalu i obradi.
◆ Ovaj dokument je u vlasništvu Guangdong HUALIBAO CO., LTD. Nemojte ga koristiti bez službenog dopuštenja.

7.Graciozan okolne za proizvodnju Statični zaštitni film

8.Napredne opreme na masovnu proizvodnju za statičke zaštitni film

Our Hualibao CO LTD develops this PE film which has different viscosity without the traditional glue coating process. Generally, it is used on surfaces that are sensitive to adhesives or glue residues. It is used on glass, lenses, high-gloss plastic surfaces, acrylic and other very smooth surfaces. Static electricity is not felt outside the film, it is from the mucous membrane with low adhesion which is perfectly enough for the highlight surface.

Pošalji poruku nas:

upit sada
upit sada