Ստատիկ Պաշտպանիչ Film
1.Product Basic Structure For Static Protective Film:
2. Product SpecificationFor Static Protective Film：
3. Դիմում & Characters For Static Protective Film:
◆ Uniformity of thickness and good flatness;
◆ The product has good transparency, no water ripple and small crystal point.
◆ High static resistance and good static effect.
◆ Good viscosity, which can be adjusted to the customer’s requirements;
◆ This product meets the national industry standards.
◆ Widely applicable to glass, lenses, high gloss plastic surface, ABS board, PC panel, PMMA sheet, acrylic materials and other very smooth surface.
4. Direction Use For Static Protective Film
◆ Clean your material thoroughly before use. Keep the surface dry and clean, յուղից ազատ, dust, solvents or other chemicals to prevent any residue happen.
◆ Use roller or stamping machine when use the protective film.
◆ Make sure the film is perfectly stick to material.
◆ Suggested temperature of surface and surroundings at +15°C to 40°C for the embossed film lamination.
5. Storage Condition
◆ Best keep it in temperature 23±2（℃）, humidity 65%±5%.
◆ Guaranteed period: Within 6 months after purchase. Not included if it exposed to sunlight, above 40℃ and 70% humidity or below 0℃.
◆ Data above is tested by method of industry recognition but not as guarantee of size of product.
◆ Check with sample before or contact us when use in special material and processing.
◆ This document is owned by GUANGDONG HUALIBAO CO.,LTD. Do not use it without official permission.
7.Graceful surrounding For Manufacturing Static Protective Film
8.Advanced equipments on mass production for Static Protective Film
Our Hualibao CO LTD develops this PE film which has different viscosity without the traditional glue coating process. Generally, it is used on surfaces that are sensitive to adhesives or glue residues. It is used on glass, lenses, high-gloss plastic surfaces, acrylic and other very smooth surfaces. Static electricity is not felt outside the film, it is from the mucous membrane with low adhesion which is perfectly enough for the highlight surface.