1.Specification ForSpecial Color LDPE Protective Film
Below specification for the protective film can be made by our Hualibao company as your needs, please send us your spec ads below for the product you demand.
Product: | Special Color LDPE Protective Film |
Colors: | As customer’ requirement |
Printability: | 1-3 different color |
Thickness: | 30-150 microns |
Length: | 50-2000m |
Width: | 30-1560mm |
ადჰეზია: | Extremely low to high, 10-1200g/25mm |
Adhesive: | Water based or Solvent acrylic resin. |
Application: | Temporary surface protection for wood, floor, glass, metal, plastic sheet, etc. |
Features: | Hot resistant up to 80 degree C, Special easy-peel-off & remove, stable adhesion, no residue after removal. |
Packing: | Carton package, pallet package |
MOQ: | 20000 square meters. |
Lead Time: | 10~30 days, depends. |
2. Use Method for Special Color LDPE Protective Film:
(1) Make sure the surface is dry, free from dust, oil, solvents or other chemicals in case of any residue is caused by our acid adhesive.
(2) Use laminating machines to apply the film would be better. Try to eliminate or minimize film elongation, and the formation of air bubbles and folds during lamination.
(3) The best results are obtained at temperature +15°C to 40°C.
(4) Removing this adhesive plastic film is advisable to perform in the temperature range 5°C to 40°C.
(5)The colored film is not suitable for extreme thermoforming.
(6) Hualibao customized color films can be widely used on many surfaces, please check with our representative before use.
3.Hualibao Factory Overview: Large factory, graceful surrounding
4.Hualibao Facilities Overview: Advanced equipments