duct cover shield self-adhesive film

Short Description:

Protect all types of ductwork with this adhesive duct protection film. Duct Cover Shield will not leave a residue on metal after removal and is highly resistant to punctures.

Product Detail

Product Tags

The ultimate film for duct protection. Duct Cover Shield is a self-adhering protective film for HVAC ducts. It has a very high adhesion, yet it won’t leave a residue on metal after removal. This durable film is very resistant to tears and punctures. Duct Cover Shield also helps to meet SMACNA guidelines for providing temporary closures on open ductwork.
Available Colors Blue , Clear
Recyclable Yes
Reusable No
Material Type Plastic
Breathable No
Adhesive Yes
Liquid Resistant Yes
Flame Retardant No


Thickness 3 mil nominal

Film Low Density Polyethylene

Adhesive Type Water-based Acrylic

Adhesion Level 12.7 oz/in

Tensile Strength 2800 psi

Temperature (Ideal) 70° F

Humidity (Ideal) 50%

Elongation (%) 525%

Chemical Name Acrylic PSA

Chemical Family Acrylic PSA Polyethylene Film

Chemical Formula Proprietary

Trade Name Duct Cover Shield

Material Use Provides temporary closures


Peel back edge of Duct Cover Shield and begin to unroll. Press down edge at beginning of area to be covered so Duct Cover Shield adheres. Continue rolling onto area, applying pressure and smoothing down the film while doing so. Carefully cut end with a sharp edge. When finished, fold edge of the film back against the roll to use at a later time. Removal: roll up Duct Cover Shield and discard.

Store at room temperature. If Duct Cover Shield is stored in extreme conditions over 95° F or below 40° F allow product to return to room temperature prior to use.

SDS sheets for Surface Shields products available by request.

Send your message to us: