Printed Black and White Adhesive LDPE Film
Product Specification For Printed Black and White Adhesive LDPE Film
Printed Black and White Adhesive LDPE Film, made of 100% new low density polyethylene materials. Coated with water-base or solvent acrylic resin adhesion, which is eco-friendly. With black and white master batch input during the process of three layers co-extrusion, it comes out one side black and the other side white. We can coat water based or solvent acrylic acid on the film accordingly.
Technical Data For Printed Black and White Adhesive LDPE Film
|Product:||Printed Black and White Adhesive LDPE Film|
|Adhesion:||Low to high, 50 – 1200g/25mm|
|Adhesive:||Water-based Acrylic; Solvent resin.|
|Application:||Temporary surface protection for stainless steel, glass, floor, window, metal plate, plastic sheet, etc.|
|Features:||Environmental, durable, recyclable, safe.|
|Stable adhering capacity.|
|Easy to paste, easy to peel without any residue|
|Acid-resistant, Anti-UV, moisture-proof, anti-corrosion|
|Packing:||Carton package, pallet package, or as required.|
|Lead Time:||7~18 days|
Test Method For Printed Black and White Adhesive LDPE Film
1. Nominal thickness
2. Adhere to SUS430BA, Tensile speed 300mm/min, Peeling angle 90deg, Dwell time20-40min
3. Tensile speed 300mm/min, strength and elongation when breaking
Especially to be emphasized are the following properties:
The excellent lay-flat property guarantees excellent lamination without wrinkles
The film can be peel off by hand easily without residue
Stability of outdoor environment with anti-uv added to the film
Duly inspect the adaptability of this product to your intended use, prior to its application.
We may conduct the adaptability test in your favor. However, its content and results do not guarantee your use. It is of your responsibility to ultimately determine its adaptability.
When applying the product to a display material, test with particular attention on appearance defects Stain, cloudiness or unevenness may appear on the surface of the display material, depending on its type. Traces of air bubbles may be left if they are trapped during application.
Aforementioned problems may also arise when the product is stored for a long period of time after application.