Folie protectoare PET is very common in our lives. It is critical to maintain the product surface, avoid surface damage, and ensure product quality. However, the storage, transportation, and maintenance of PET protective film can not be ignored, which can effectively avoid unnecessary wear or damage and ensure product quality and effect. Incorrect maintenance will destroy the application of the PET protective film. For example, if the PET protective film is cleaned with water, if it is not dry immediately, the long-term protective film will lose the static induction and self-adhesive actual effect. If it is dried through the sun, it will make the PET film hard and unusable. The above-mentioned incorrect maintenance methods will cause film damage. Store inside and outside the warehouse to prevent sun and precipitation; do not touch the organic solvents of strong acid and alkali oil, keep cleaning and dry, keep 1 meter away from the machine, and the indoor temperature is between -15c-40c The tape is on a roll rather than folded. When the storage time is too long, it should be turned every other hour. It is not allowed to apply adhesive tapes of
different types, specifications, types, compressive strengths, and cloth layers. Do not make the tape snake or creep, stick to the roller, the vertical roller is sensitive, and the tension should be moderate. Cleanliness is the basic condition for the good operation of the tape. Foreign substances will affect the difference in tension and even break. Use dry paper towels to remove dust and avoid oil stains. When there is dust in the pet protective film, the dust can be removed with a dry paper towel, and the effect of washing with water is reversed. Because the pet protective film is statically charged by itself, fine dust can form part of the pet protective film, which is difficult to remove. Grease is the natural enemy of the pet protection film. Although it cannot directly harm the pet protection film, if it is stained with oil, the pet protection film cannot protect the product and lose its material. Therefore, oil stains must be avoided during maintenance.
Post time: 2020-06-13
