Statik Koruyucu Film

Kısa Açıklama:

Electrostatic film is actually made with a kind of electrostatic fluid, co-extruded on the surface of the original film, to play a role of adhesion. People also call it as self-absorptive film, self-adhered film, non glue film or non-gel film.

Ürün ayrıntısı

Ürün etiketleri

1.Product Basic Structure For Static Protective Film:

Static Protective Film

2. Product SpecificationFor Static Protective Film

Genel Özellikler
MADDE BİRİMİ SPEC Tolaahriance TEST STANDARD
Görünüm / Açık / Visual
Genişlik aa 1000-1540 ±5% GB/T451.2-2002
uzunluk metre 100-5000 ±5% GB/T451.2-2002
Kalınlık um 30-80 ±5% GB/T7125-2014
yapışma gf / 25mm 1-50 ±5% GB/T 2792-2014

 

3. Uygulama & Characters For Static Protective Film:
◆ Uniformity of thickness and good flatness;
◆ The product has good transparency, no water ripple and small crystal point.
◆ High static resistance and good static effect.
◆ Good viscosity, which can be adjusted to the customer’s requirements;
◆ This product meets the national industry standards.
◆ Widely applicable to glass, lenses, high gloss plastic surface, ABS board, PC paneli, PMMA sheet, acrylic materials and other very smooth surface.

Static Protective Film

4. Direction Use For Static Protective Film
◆ Clean your material thoroughly before use. kuru ve temiz bir yüzey tutunuz, yağsız, toz, çözücüler ya da diğer kimyasal maddeler herhangi bir artık meydana önlemek.
◆ Use roller or stamping machine when use the protective film.
◆ Make sure the film is perfectly stick to material.
◆ Suggested temperature of surface and surroundings at +15°C to 40°C for the embossed film lamination.

5. Storage Condition
◆ Best keep it in temperature 23±2(℃), humidity 65%±5%.
◆ Guaranteed period: Within 6 months after purchase. Not included if it exposed to sunlight, above 40℃ and 70% humidity or below 0℃.

6. Precautions:
◆ Veriler Yukarıdaki sanayi tanıma metodu ile test edilmiş, ancak değil ürünün boyutundan garantisi olarak.
◆ önce örnek ile kontrol edin veya zaman bize ulaşın özel malzeme ve işleme kullanımı.
◆ Bu belge GUANGDONG HUALIBAO CO aittir., LTD. resmi izni olmadan kullanmayın.

7.İmalat Statik Koruyucu Film için Nazikçe çevreleyen

8.Statik Koruyucu Film seri üretime Gelişmiş ekipmanları

Our Hualibao CO LTD develops this PE film which has different viscosity without the traditional glue coating process. Generally, it is used on surfaces that are sensitive to adhesives or glue residues. It is used on glass, lenses, high-gloss plastic surfaces, akrilik ve diğer çok pürüzsüz yüzeyler. Static electricity is not felt outside the film, it is from the mucous membrane with low adhesion which is perfectly enough for the highlight surface.

bize mesaj gönderin:

SORGU YAPIN
SORGU YAPIN