壓花保護膜

簡短說明:

The glue coated in diamond shapes on film is easy for the air removal after used on the diffuser PET glass plastic surface.
Well sticky and easy removal without any residue left.
Low tack adhesion from 3 to 50g/25mm, suitable for electronic product surface.
Best factory price helps reduce your purchasing cost.
Large factory manufacturing, personalized customization with good quality stability.

產品詳情

產品標籤

1. Product Basic Structure For Embossed Protective Film:

Embossed Protective Film

2. Standard Specification For Embossed Protective Film

一般屬性
項目 單位 規範 托拉蘭斯 測試標準
外觀 / 清楚 / 視覺
厚度 微米 30-80 羸5% GB/T7125-2014
粘附 gf/25毫米 5-20 羸5% GB/T 2792-2014
寬度 毫米 1220, 1250 羸5% GB/T451.2-2002
長度 200, 400, 500 羸5% GB/T451.2-2002

Note: We also offer customized manufacture for below SPEC, please check with Hualibao representative to select the suitable embossed film before order:

Base Material: LDPE film or PE film

顏色: Clear/Blue

Adhesion Range: 3-50克/25毫米

厚度 (Micron/μ): 30mic~ 100mic, or customized

寬度: 10mm ~ 1560mm

長度: 50m ~ 1000meters, standard 200, 400, 500 and 1000m.

3. 應用 & Characters For Embossed Protective Film:
◆Protect all kinds of plastic shells, displays, mobile phone screens, PVC sheets, acrylic sheets, solar panels, spray parts and other surfaces, and play a protective role in the production process; Greatly improve work efficiency, increase output, reduce the defective rate of products.

◆Embossed PE film texture is soft, high transparency, can effectively avoid the bubble phenomenon when the product coated film, can provide better protection for the product.

◆Embossed film can make the goods in the transport, processing, storage and use of the process is not contaminated, corrosion, scratch, protect the original product bright and clean.

◆It is suitable for electronic and electrical materials: 導光闆, electronic screen, instrument surface, automobile instrument, shell, air conditioning surface and various household appliances surface protection, titanium metal plate, 等.

◆Also widely used in plastic plate: plexi glass plate, PVC light panel, ABS light panel, plastic plate and plastic shell protection, all kinds of die cutting processing process protection

Embossed Protective Film

4. Direction Use For Embossed Protective Film
·使用前徹底清潔材料. 保持表面乾燥同清潔, 不含油, 塵, 溶劑或其他化學品,以防止任何殘留物的發生.
·使用保護膜時使用滾筒或沖壓機.
·確保薄膜完全粘在材料上.
·壓花膜層壓嘅壓花膜層壓嘅地表同周圍環境建議溫度喺+15°C至40°C.

5. Storage Condition for Embossed Protective Film
·最好喺23歳2 (°C )溫度下保持, 濕度65%~5%.
·保證期: 係 6 購買後幾個月. 唔包括,如果它暴露喺陽光下, 高於40°C同 70% 濕度或低於0°C.

6. Precautions for Embossed Protective Film:
•以上數據採用行業識別方法測試,但不能保證產品尺寸.
·喺特殊材料同加工使用之前,請先檢查樣品,或聯繫我哋.
•本文件歸廣東華利寶有限公司所有. 未經官方許可,請勿使用.

7.Graceful surrounding For Manufacturing Embossed Protective Film

 

8.Advanced equipments on mass production for Embossed Protective Film

將你嘅消息發送畀我哋:

即刻查詢
即刻查詢